Enterprise IP Phone Basic Call Functions
45
Call Hold
This call function allows you to place an active call on hold. In this case your IP PBX
might play a melody or message to the other party while waiting. Other calls can be
received and made while having a call on hold.
To hold/resume a call:
1)
Press the
HOLD
button to put your active call on hold.
2)
During the call, there will be a "dodo.." sound for each 30 second, suggesting
that there is a current call in hold state.
3)
If there is only one call on hold, press the
HOLD
button again to retrieve the
call.
4)
If there is more than one call on hold, press the
Up/Down navigation keys
or
the corresponding
Line key
to highlight the call, then press the
HOLD
button
again to retrieve the call.
Note:
When you are under the call hold status, putting down the handset, the
conversation will go on over the speaker instead of hanging up the call.
Call Waiting
This call feature allows your phone to accept other incoming calls to the extension no
matter under which circumstances.
To enable/disable Call Waiting via Phone interface:
1)
Press
Menu
->
Features
->
Call
Waiting
.
2)
Use the
navigation keys
to active/inactive
Call Waiting
.
3)
Use the
navigation keys
to enable/disable the
Play Tone
option. This option
used to define whether to play ring tones when there is call incoming during a
call.
4)
Press
OK
button to save the changes, or
Menu
to return to the previous menu.
