Welch Allyn ELI 150, Руководство по обслуживанию

Страница: 95 / 104

Section 6
6-15
The LCD displays the following message:
When the LCD displays the above message, the unit is ready to receive the ECGs from the transmitting
electrocardiograph. Follow the instructions on transmitting records as described in this section. The receiving unit
only acts as a printer. Received ECGs will not be viewed or stored. To terminate the receiving mode, press the
STOP key.
Note: The ELI 150 will receive records from Mortara model cardiographs. The
Mortara model cardiographs (ELI 100, ELI 200, Landscape, and Portrait) will not
receive the ELI 150 records
.
WLAN Test
The following test requires a properly configured access point and test software to receive ECG data from the UUT.
It is recommended to setup the test configuration to use DHCP, WEP key encryption, and channel 6; however this is
not a requirement.
Note- The cardiograph uses WEP keys 0-3; these may not correspond directly to your access point WEP keys if it
uses keys 1-4. (See example in table)
Linksys Cardiograph
1 0
2 1
3 2
4 3
From the main menu press the “more” key.
Select “system configuration” and page to the menu screen containing the WLAN settings.