Welbilt Lincoln Impinger 1600 Series, Международное руководство по обслуживанию

Страница: 15 / 52

Document #: LIN_GO_SM_IMPLOPRO_S1600_INTL_4605727 – 9/20
Section 2 Installation
3. How to Stack a Double Stack:
The stand is a 40" (1016 mm) x 47" (1194 mm)
rectangle. Set it in place with a 40" side facing out. This
will be the front of the oven. Ovens on casters require
a level floor. NOTE: The oven top is packed with oven
stand. Remove top from stand before assembly.
P/N 1612
A. Remove the first oven from the dolly and set it on
the stand. The control panel should be on the right
rear as you face the oven. Be sure that the oven
sets squarely on the stand and is fully seated.
B. Place the second oven on top of the first one. Be
sure that it is sets on squarely and is fully seated.
The control panels go on the right rear. Now install
oven top and duct cap onto rear cover.
4. How to Stack a Triple Stack: The stand is a 40"
(1016 mm) x 47" (1194 mm) rectangle. Set it in place
with a 40" side facing out. This will be the front of the
oven. Ovens on casters require a level floor. NOTE: The
oven top is packed with oven stand. Remove top from
stand before assembly.
P/N 1610
A. Remove the first oven from the dolly and set it on
the stand. The control panel should be on the right
rear as you face the oven. Be sure that the oven
sets squarely on the stand and is fully seated: