background image

3.2  

 Intended use of your combi oven

Intended use

The combi oven is designed and built solely for cooking different foodstuffs in standard-sized food containers (e.g. Gastronorm

containers, standard baking trays). Steam, convection and combi-steam (non-pressurized superheated steam) are used for this

purpose.

The food containers can be made of stainless steel, ceramic, plastic, aluminium, enamelled steel or glass. Glass food contain-

ers must not exhibit any form of damage.

The combi oven is intended solely for professional, commercial use.

Restrictions on use

Some materials are not allowed to be heated in the combi oven:

NO dry powder or granulated material

NO highly flammable objects with a flash point below 270 °C, such as highly flammable oils, fats, plastics, cleaning products or

alcohol-based fluids

NO food in sealed tins or jars

Requirements to be met by personnel

The combi oven must only be operated and installed by personnel who satisfy specific requirements. Please refer to 'Require-

ments to be met by personnel, working positions' on page 21 for the training and qualifications requirements.

Personnel must be aware of the risks and regulations associated with handling heavy loads.

Requirements relating to the operating condition of the combi oven

The combi oven must only be operated when all safety devices and protective equipment are fitted, in working order and fixed

properly in place.

The manufacturer regulations for operating and servicing the combi oven must be observed.

The combi oven must not be loaded over the maximum permissible loading weight for the given model or shelf allowance; see

'Technical Data' on page 65.

Requirements relating to the operating environment of the combi oven

Specified operating environment for the combi oven

The ambient temperature lies b4 °C and +35 °C

NOT a toxic or potentially explosive atmosphere

Dry kitchen floor to reduce the risk of accidents

Specified properties of the installation location

NO fire alarm, NO sprinkler system directly above the appliance

NO flammable materials, gases or liquids above, on, beneath or in the vicinity of the appliance

Mandatory restrictions on use

Shelter from rain and wind must be provided if operated outdoors

Appliance must NOT be shifted or moved during use

Cleaning requirements

Use only cleaning agents that have been approved by the manufacturer.

Use only materials specified by the manufacturer for cleaning; please refer to the 'Cleaning instructions' in the User manual.

High-pressure cleaners must NOT be used for cleaning.

Water jets must NOT be used for cleaning the exterior. The water spray of the recoil hand shower or an external water spray is

permitted solely for cleaning the cooking chamber.

The combi oven must NOT be treated with acids or exposed to acid fumes, except for the purpose of descaling the cooking

chamber by an authorized service company in accordance with the manufacturer's instructions.

3.3  

 Warning signs on the combi oven

Positioning of warning signs

The following illustration shows a size 6.10 electric combi oven as representative of all table-top units:

3 For your safety

Installation manual

15

Содержание Convotherm maxx pro 4 10.10





















































































































Отзывы: