5.6 Setting up a table-top unit on a stand
Rules for setting up the appliance safely
Observe the following rules to ensure that the appliance is installed in a stable situation:
■
It must be possible to set up the stand in the installation position so that it cannot tip over or slide about. The supporting surface
must comply with requirements.
The following rules must be observed to meet hygiene standards:
■
For stands that contain shelf levels for food containers, the top cover must be fitted on the stand to prevent dirt getting onto any
food held temporarily in the stand.
Setting up the appliance on a stand
1.
Screw the threaded bolts into the threaded holes provided in the oven stand
and tighten the threaded bolts with the screwdriver.
2.
Position the appliance on the stand.
Make sure that all four bolts are guided into the locating holes in the appliance
feet provided for the purpose.
5 Setting up the appliance
Installation manual
35
