6
Item
Explanation
Buttons
of
Slave Motor
The 4 buttons have two working status: normal working status
and menu setting status, the function of normal working status is
that “
▲/+
” is the opening function, “
▼/-
” is the closing function,
“
■QUIT
” is the stopping function, “
” is the setting function
which is invalid when it is short pressed under normal working
status; Long press “
” for 2 seconds to enter the menu setting
status. In the menu setting status, “
▲/+
” and “
▼/-
” are used to
adjust menu items or parameters, “
■QUIT
” is to cancel the set
value or exit the menu setting status, “
” is used to enter the
next menu or save the set value. (Note: These buttons can only set
the menu of slave motor)
LCD Screen
It is used to display the information of the master motor of the
barrier gate, such as the working status, parameters, menu items.
LED
Digital
Tube
It is used to display the information of the slave motor of the
barrier gate, such as the working status, parameters, menu items.
4.2. Controller Parameter Setting of Master Motor
Long press “
三
” button for 2 seconds to enter the regular menu setting status. Select
menu items by short press or long press "
▲
" and "
▼
" buttons, short press once to
increase or decrease by one, long press to continuously increase or decrease. When
the required diameter displayed by the LCD, press “
三
” button again to enter the
setting of the specified item, and press the "
■
" to return to the previous level or exit
the setting. When the specified parameter setting is completed, you must press "
三
"
button to confirm it to take effect. The currently set parameters is invalid if pressing "
■
" button.
The recommended range specifically refers to the 2m carbon fiber boom.
4.3. "Regular Menu" Command List of Master Motor
4.3.1. Opening operation parameters
Sub-menu
Defaults Range
Recommended
Values
Remarks
1.1 Acceleration Time
3
1-20
≥
3
The smaller the
value, the faster the
speed
