16
"
▲
/+" and "
▼
/-" buttons, short press once to increase or decrease by one, long press
to continuously increase or decrease. When the required diameter displayed by the
LED digital tube, press “
” button again to enter the setting of the specified item,
and press the "
■
/QUIT" to return to the previous level or exit the setting. When the
specified parameter setting is completed, you must press "
" button to confirm it
to take effect. The currently set parameters is invalid if pressing "
■
/QUIT" button.
4.6. "Regular Menu" Command List of Slave Motor
Menu Function
Defaults Range
Recommended
Values
Remark
F-00
Boom Up
Speed
100
15-100 90-100
The larger the value, the faster the
boom up speed
F-01
Boom Down
Speed
100
15-100 90-100
The smaller the value, the faster the
boom down speed
F-02
Boom Up
deceleration
position
40
10-80
35-45
The angle at which the boom up
starts to decelerate, unit: degree
F-03
Boom Down
deceleration
position
45
10-80
40-55
The angle at which the boom down
starts to decelerate, unit: degree
F-04
Low-speed
working
angle of boom
up
90
15-90
90
The angle of the last section of
low-speed zone during boom up
F-05
Low-speed
working
angle of boom
down
0
0-75
0
The angle of the last section of
low-speed zone during boom down
F-06
Boom up limit
position speed
5
1-50
4-8
Boom up limit position speed
F-07
Boom down
limit position
speed
2
1-50
2-6
Boom down limit position speed
F-08
Position
adjustment of
horizontally
140
1-600+ 130-140
Adjustment horizontal position of the
barrier gate
