© 2022 WEINZIERL ENGINEERING GmbH
Seite 27/36
Datapoint type
Depending on this parameter, the following objects are available for color control:
▪
Single color control RGB (3 x DPT 5.010)
Group object
Type KNX
Size
Direction
GO 11 Button A0: Value R
– Set color
5.010
1 Byte
To KNX
GO 12 Button A0: Value G
– Set color
5.010
1 Byte
To KNX
GO 13 Button A0: Value B
– Set color
5.010
1 Byte
To KNX
▪
Single color control RGBW (4 x DPT 5.010)
Group object
Type KNX
Size
Direction
GO 11 Button A0: Value R
– Set color
5.010
1 Byte
To KNX
GO 12 Button A0: Value G
– Set color
5.010
1 Byte
To KNX
GO 13 Button A0: Value B
– Set color
5.010
1 Byte
To KNX
GO 14 Button A0: Value W
– Set color
5.010
1 Byte
To KNX
▪
Color control RGB (DPT 232.600)
Group object
Type KNX
Size
Direction
GO 11 Button A0: RGB color value (3 Bytes)
– Set color
232.600
3 Byte
To KNX
Color position 1
– 8
For each position a color can be chosen.
If only one color position is activated, it is sent on short button press. If several color positions are
used, the activated positions are switched through with each short button press.
The behavior for selecting and sending the color positions can be determined by the following
parameter.
Reset color position
The following options are available:
▪
Never
Starting with the first color position, the next position of the list is sent with each short button
press. After the last color position has been sent, the list starts again from the beginning.
▪
After execution
This selection enables the parameter
Time until execution
.
Beginning with the first color position, each short button press switches the position by one
position within the execution delay. At the end of the execution delay, the current color
position is sent.
