© 2022 WEINZIERL ENGINEERING GmbH
Seite 21/36
Object b
Here object b can be enabled and configured.
Cyclic sending
Cyclic sending can be configured independently for states 0 and 1:
Send interval for state 0
Send interval for state 1
The send interval of the respective state can be set here.
11.4
Button function “Dimming”
On selection of button function dimming following objects are visible:
Group object
Type KNX
Size
Direction
GO 11 Button A0: Dimming on/off
– Switch
1.001
1 Bit
To KNX
GO 12 Button A0: Dimming relative
– Brighter/Darker
3.007
4 Bit
To KNX
The time for detection of a long button press can be set in the general parameters and is valid for
all buttons.
Dimming function
The parameter “Dimming function” determines whether only one switching/dimming direction or 1-
button control is to be used.
▪
On / Dim brighter
▪
Off / Dim darker
▪
Toggle direction
If the button detects a short button press, a switching telegram is sent via object 11. On long button
press, a relative dimming is sent over the entire dimming range to object 12. When releasing after
long button press, a dimming-stop telegram is sent via object 12.
