Weidmuller IE-WL-BL-AP-CL Скачать руководство пользователя страница 76 | Manualshive

Страница: 76 / 76

background image

Wi-Fi device IE-WL-BL-AP-CL

Supporting Information

B-76

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

FCC 15.407(e): Within the 5.15-5.25 GHz band, U-NII devices will be restricted to indoor operations to reduce
any potential for harmful interference to co-channel MSS operations.

NOTE

The availability of some specific channels and / or operational frequency bands are country dependent and are
firmware programmed at the factory to match the intended destination. The firmware setting is not accessible
by the end user.

R&TTE Compliance Statement

Weidmüller declares that the apparatus IE-WL-BL-AP-CL complies with the essential requirements and other
relevant provisions of Directive 1999/5/EC.

This equipment complies with all the requirements of DIRECTIVE 1999/5/CE OF THE EUROPEAN PARLIAMENT
AND THE COUNCIL OF 9 March 1999 on radio equipment and telecommunication terminal equipment and the
mutual recognition of their conformity (R&TTE).

The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommunications Terminal
Equipment and Satellite Earth Station Equipment) as of April 8, 2000.

Safety

This equipment is designed with the utmost care for the safety of those who install and use it. However, special
attention must be paid to the dangers of electric shock and static electricity when working with electrical
equipment. All guidelines of this and of the computer manufacturer must therefore be allowed at all times to
ensure the safe use of the equipment.

EU Countries Intended for Use

The ETSI version of this device is intended for home and office use in Austria, Belgium, Denmark, Finland,
France (with Frequency channel restrictions), Germany, Greece, Ireland, Italy, Luxembourg, Portugal, Spain,
Sweden, The Netherlands, and United Kingdom.

The ETSI version of this device is also authorized for use in EFTA member states Norway and Switzerland.

EU Countries Not Intended for Use

None.

Potential Restrictive Use

France: only channels 10, 11, 12, and 13.

«
...
74
75
76

Содержание IE-WL-BL-AP-CL













































































Отзывы:

Нет отзывов

Похожие инструкции для IE-WL-BL-AP-CL

Бренд: D-Link Страницы: 4

Бренд: D-Link Страницы: 12

Бренд: D-Link Страницы: 6

Бренд: D-Link Страницы: 12

Бренд: D-Link Страницы: 140

Бренд: D-Link Страницы: 2

Бренд: D-Link Страницы: 48

Бренд: D-Link Страницы: 16

Бренд: D-Link Страницы: 16

Бренд: D-Link Страницы: 2

Бренд: D-Link Страницы: 178

Бренд: Z-Com Страницы: 23

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 2

Бренд: Philips Страницы: 18

Бренд: Philips Страницы: 20

Бренд: Philips Страницы: 78

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды