Wi-Fi device IE-WL-BL-AP-CL
Web Console Configuration
3-40
TCP/UDP port filters
Setting
Description
Factory Default
Enable
Enables TCP/UDP port filters
Disable
Disable
Disables TCP/UDP port filters
Policy
Setting
Description
Factory Default
Accept
Only the packets fitting the entities on list can be allowed.
Drop
Drop
Any packet fitting the entities on list will be denied.
ATTENTION
Be careful when you enable the filter function:
Drop
+
“
no
entity on list is activated
”
= all packets are
allowed
Accept
+
“
no
entity on list is activated
”
= all packets are
denied
SNMP Agent
The IE-WL-BL-AP-CL supports SNMP V1/V2c/V3. SNMP V1 and SNMP V2c use a community string match for
authentication, which means that SNMP servers access all objects with read-only or read/write permissions
using the community string
public
/
private
(default value). SNMP V3, which requires you to select an
authentication level of MD5 or SHA, is the most secure protocol. You can also enable data encryption to
enhance data security.
SNMP security modes and security levels supported by the IE-WL-BL-AP-CL are shown in the following table.
Select the security mode and level that will be used to communicate between the SNMP agent and manager.
Protocol
Version
Setting on
UI web page
Authentication
Type
Data
Encryption
Method
SNMP
V1, V2c
V1, V2c
Read
Community
Community string No
Use a community string match for
authentication
V1, V2c
Write/Read
Community
Community string No
Use a community string match for
authentication
SNMP V3 No-Auth
No
No
Use account with admin or user to access
objects