Copyright © 2013 Weidmüller Interface GmbH & Co. KG
79 / 103
All rights reserved. Reproduction without permission is prohibited.
►Click button “Add entry” to add the new static route to the routing table.
Values for the second route:
● Destination network:
192.168.21.0
(Public address range of machine network 2 at LAN port of
Router 2)
● Subnet mask:
24 (Class C)
● Gateway:
172.16.1.253 (Public address of WAN port of Router 2)
● Metric:
Can be left blank (only one route, therefore no need for prioritization)
● Interface:
LAN
(Router 2 can be reached by LAN port)
►Click button “Add entry” to add the new static route to the routing table.
►Then click button “Apply settings” to activate the new settings.
Figure A4-9
: Changed values of menu
IP routing (Tab Configuration)
displaying 2 new static routes
8
. Monitoring the new activated “routes” at Router 3
► Select menu Configuration
Network
IP routing
Tab “State”
Figure A4-10
: Menu
IP routing (Tab State)
showing the new active routing table
Routing table of Router 3
Configured static routes of Router 3
