Copyright © 2013 Weidmüller Interface GmbH & Co. KG
44 / 103
All rights reserved. Reproduction without permission is prohibited.
Figure 50: System
Backup settings
Tab „System“
With this menu item, the Router configuration can be stored or restored to/from the file system of the
connected computer. The exported configuration file is of extension type <name>.cf2 and encrypted.
Note
: For creating a configuration backup file (.cf2) always the configuration currently stored in the Flash
memory will be used. Please save the configuration to Flash memory before creating a backup file.
Figure 51: System
Software update
Tab „System“
With this menu item a firmware update can be carried out.
The firmware update can be done via a FTP, TFTP or HTTP server or by a browser upload getting the firm-
ware file directly from the connected configuration PC.
The easiest way to update the Router with a new firmware is to use the function „Update by browser
up
load“.
Additionally it can be determined whether the Router should be reset to factory default settings after the
firmware update. If not set then the Router will use current configuration after firmware update.
