5
ASSEMBLY
1.
With the help of another person, stand the
weight system in a vertical position.
Have the
other person hold the weight system
securely until assembly step 1 is completed.
Pivot the two Front Stabilizers (3) to the posi-
tions shown. Secure each Front Stabilizer to the
Frame (1) with an M12 x 30mm Screw (72).
Slide the Foot Plate (93) down onto the Front
Stabilizers (3).
Orient the Rear Stabilizer (2) as shown. Attach
the Rear Stabilizer to the Frame (1) with an
M12 x 60mm Screw (77) and an M12 Washer
(83).
For your convenience, the weight system is
shipped almost fully assembled.
Before complet-
ing assembly, carefully read the following informa-
tion and instructions.
•
Assembly requires the assistance of a second
person.
•
Because of its size and weight, the weight sys-
tem should be assembled in the location where it
will be used. Make sure that there is enough
clearance to walk around the weight system.
•
Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
•
Assembly requires the included hex keys and
grease and your own Phillips screwdriver.
1
3
93
3
1
72
77
1
83
2
