WEGER WALTER GMBH DIWER EVO DP80 Series, Инструкция по установке и эксплуатации

Страница: 43 / 64

Installation and Operating Manual Page
41
Printed: 02/2015
Before commissioning the units, remove the transport securing devices from the vibration
dampers that might otherwise obstruct the fan.
See also safety sign attached to the machine.
Disinfectants
Use only alcohol-based disinfectants approved in the country of operation of the unit (e.g.
approved by RKI, VAH, DGKH).
Restart of unit after maintenance
After the maintenance and disinfection tasks have been completed, inspect the unit for dirt
and contamination before restarting it. Ensure that potentially hazardous and odorous
substances cannot enter the supply air.
Maintenance of ATEX units
Air handling units bearing the "Ex" mark must be commissioned by authorised specialist
technicians. Commissioning must only take place after it has been established that the plant
into which the air handling unit is incorporated conforms to the European Machinery Directive.
For commissioning all information in chapter 6 of this manual and information concerning
specific parts or assemblies must be taken into account. Prior to commissioning, and also
before carrying out any maintenance tasks, ensure that all conductive components of the unit
are connected to an earthing conductor.
The ATEX classification of the unit is noted on the type plate and determines its use.