Wavetronix SmartSensor HD, Руководство пользователя

Страница: 79 / 109

78
•
SmartSensor HD User Guide
match, the lanes are set up properly.
4 Repeat with other lanes and other criteria, as needed.
If the detections don’t match traffic
You may be able to improve accuracy by adjusting lane properties
and thresholds (covered later in this chapter), double-checking
the alignment (covered in the previous chapter), or changing the
mounting locations. If all else fails, contact your dealer or support@
wavetronix.com.
Using the play/pause/stop buttons
You may find it useful to use these buttons to pause or restart the
per vehicle data being constantly updated on this screen.
˿
The pause button will cause the screen to stop being updated;
when you hit play again, it will resume.
˿
The stop button will also stop the screen from being updated,
but when you hit play, all previous detections will be deleted.
Verifying lanes using logging
Figure 74.
Log File window
1
Set up a way to record what’s happening on the road, such as
a video camera or someone with a speed gun manually record-
ing passing vehicles.
2 In the lower right corner of the Verification screen, next to the
word “Logging,” click the upward-pointing arrow. The Logging
area will appear, as seen above.
Note.
This tool
records per vehicle
data and saves it
to a file. It’s useful
for verification after
the fact; you record
the traffic, log the
per vehicle data for
the same interval
of time, and then
you can compare
the two later.