Wavetronix Click 513 Скачать руководство пользователя страница 1

Страница: 1 / 11

1 of 11

WX-501-0544 • 01.22

Using the Click 513

The Click 513 monitors interval data from a SmartSensor HD by polling the SmartSensor HD to retrieve vehicle

speed, volume, and occupancy data from the latest interval for up to 4 approaches.

The Click 513 compares the detected interval data to a set of predetermined speed, volume, and occupancy

threshold values and activates a digital output when the data exceeds these threshold values.

A possible application for the Click 513 is to alert traffic control operators of a congested exit ramp. If the interval

data polled from the SmartSensor HD exceeds the threshold value(s), the Click 513 will send an alert so that

adjustments can be made to help clear the congested roadway, such as keeping the traffic light green so cars can

clear the exit ramp, or displaying a message for drivers on a dynamaic message sign (DMS).

The Click 513 utilizes the Click Supervisor software for user configuration of vehicle speed, volume, and

occupancy thresholds. Communication between the Click 513 and Click Supervisor is easy to set up and use.

Physical Features

The Click 513 is based upon the Click 500 platform, so it has the same physical features as the Click 500. The

physical features are used for easy installation and configuration.

0544

Содержание Click 513











