3
• Please read and understand this instruction manual before using
Rionfuser Electrofusion
Processors.
• Do not use or store
Rionfuser Electrofusion Processors
where volatile gas concentrations may
be present.
• Only properly trained and qualified personnel should operate
Rionfuser Electrofusion
Processors
.
• Treat electrical equipment as a potential source of ignition and follow proper practices for
working in an explosive atmosphere.
• Power source and
Rionfuser Electrofusion Processor
must be located out of the trench.
• For protection against the risk of electric shock, connect
Rionfuser Electrofusion Processors
to
properly grounded outlets only.
• Only use fusion information supplied by the manufacturer of the fitting.
• Under no circumstances should the
Rionfuser Electrofusion Processor
enclosures be opened.
All warranties are void if the factory seal has been broken.
• Before any fusion is performed, it is the responsibility of the operator to always verify that all
the information displayed is correct per the fitting manufacturer's recommendations for fusing
the attached fitting under the current ambient conditions.
Important Safety Information
It is your responsibility to ensure that this control is safely installed according to all applicable
codes and standards.
Watts is not responsible for damages resulting from improper installation and/or maintenance.
NOTICE
Read manual and all prod-
uct labels BEFORE using
the equipment. Do not use
unless you know the safe
and proper operation of this
equipment. Keep this man-
ual available for easy access
by all users. Replacement
manuals are available at
OrionFittings.com
Do not attempt to service the control. There
are no user serviceable parts inside the control.
Attempting to service the control voids the
warranty.