Watts HF scientific 28052 Скачать руководство пользователя

Страница: 54 / 67

Catalog No. 29290

Rev 3 06/2020

5.3 Routine Measurement: AUTO Mode

After the instrument has warmed up and the instrument is operating in

AUTO mode, readings will be updated (posted) once per second. These

updates occur to the screen, Modbus, 4-20mA and can be logged

internally to the instrument. These updates also affect the operation of the

alarms. Please note that these updates are all affected by the setting of

the Signal Averaging (see section 4.2.7) and possibly Offset (see section

4.2.5).

If power is lost at any time, once power is restored, the instrument will

restart and the instrument will continue in AUTO operation with the same

settings. There may be some slight instability if the instrument cooled off.

If the onboard data logging was used it will record 0.00NTU during the

period that instrument is not running.

The MTOL+ can read up to 110% of the range. Readings above 100%

of the range may not be accurate. After 110% of that range the

display will flash indicating an over-range condition. The 10 NTU

range can display up to 11 NTU, the 100 NTU range can display up to

110 NTU, and the 1000 NTU range can display up to 1100 NTU.

5.4 Data Retrieval

Data is available in several forms. It can be viewed on the screen, logged

in the instrument, read via Modbus or output the 4-20 mA.

5.4.1 USB Connection

The USB connection can be used to upload new software or download

logged data and calibration reports via a USB flash drive.
Software uploads can be made by loading the software onto a USB flash

drive and inserting it into the USB connector. The update will not affect

configurations or stored data, however it always advisable to check the

configuration as menus may change. Check our website:

www.hfscientific.com

for software upgrades. The instructions are in

section 4.2.18 of this manual.

5.4.2 File Downloads

•

For instructions see 4.2.16

•

All files download in a CSV (comma separated value) file format. These

are easily imported directly into most spreadsheet and database

programs.

•

The main data includes the Date, Time, Reading, Units, Alarm 1 and

Alarm 2. The instrument ID is part of the file name.

Содержание HF scientific 28052




































































Результаты поиска

Содержание HF scientific 28052

Отзывы:

Похожие инструкции для HF scientific 28052

Бренды по названию

Популярные бренды

Watts HF scientific 28052, Руководство владельца и пользователя

Результаты поиска

Содержание HF scientific 28052

Отзывы:

Похожие инструкции для HF scientific 28052

Бренды по названию

Популярные бренды