manualshive.com logo in svg

Watts AERCO ADMS Series, Руководство пользователя/Инструкция по эксплуатации

Поделиться
Скачать
Watts AERCO ADMS Series Скачать руководство пользователя страница 7

Understanding Safety Information 

This safety-alert symbol is 
shown alone or used with a sig-
nal word (DANGER, WARNING, 
or CAUTION), a pictorial and/
or a safety message to identify 
hazards and alert you to the 
potential for death or serious 
personal injury.

Identifies hazards which, if not 
avoided, will result in death or 
serious injury. 

Identifies hazards which, if not 
avoided, could result in death or 
serious injury. 
  
Identifies hazards which, if not 
avoided, could result in minor or 
moderate injury. 
  
Identifies practices, actions, or 
failure to act which could result 
in property damage or damage 
to the equipment.

•  Read the Manual and all product 

labels and follow all safety and other 

information.

•  Learn how to properly and safely use 

the equipment BEFORE installing,  

set up, using, or servicing.

•  Keep the Manual available for easy 

access and future reference.

•  Replace missing, damaged, or illegible 

Manual and product labels.

•  Replacement Manuals available at 

aerco.com

This pictorial alerts you to the 
need to read the manual.

This pictorial alerts you to 
scalding, burn and hot water 
hazards. 

This pictorial alerts you to burn 
and hot surfaces hazards.

This pictorial alerts you to elec-
tricity, electrocution, and shock 
hazards. 

This pictorial alerts you to the 
need to perform appropriate 
Lock Out/ Tag Out procedures. 

WARNING

!

CAUTION

!

NOTICE

DANGER

!

!

WARNING

!

TO AVOID DEATH, 

SERIOUS PERSONAL 

INJURY, PROPERTY 

DAMAGE, OR DAMAGE 

TO THE  EQUIPMENT:

Reading & Understanding the Manual

Important Safety Information

OMM-0126-0A

Page 3 of 71 

Содержание AERCO ADMS Series













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды