Control Module and Digital Display
Description of Controls and Functions
The following sections generally outline and describe the controls and functions of the ADMS Control
Module you will experience when using the digital display. See “Set Up and Programming” section of
this Manual for use instructions.
The intelligence running the ADMS is contained within a Control Module. The color and touch screen
digital display allows the user to view temperatures, pressures, flow rates throughout the system, and
to configure the controls. The following sections describe and explain the user interface to assist in
navigating and configuring the control.
After power up, the “Attention!” screen (shown below) will appear. You have 60 seconds to begin
system navigation.
The Control will begin mixing operation after 60 seconds. The "Attention" message will appear again
after 10 seconds of inactivity until the 60 seconds time has elapsed.
NOTICE
WARNING
!
Always read the Manual and all product labels
and follow all safety and other information. If
you are ever uncertain about a particular task or
the proper method of operating this equipment,
ask your supervisor, consult this Manual, or visit
aerco.com
Start Up Screen
OMM-0126-0A
Page 9 of 71
