Watts Premier 5 SV DELUXE, Инструкция по установке, эксплуатации и обслуживанию

Страница: 9 / 28

Page 9
Green Tube Connection
Drape the green tube connected to the 90° Inlet white plastic elbow on the left side of the
Reverse Osmosis Module over to the adapta valve attached to the cold water sink faucet or
attached to the Angle Stop Valve, leaving a gentle curve in the tubing. Cut to desired
length using a sharp knife.
Insert the green tube into the ¼” opening until it stops. Slide nut
and sleeve down and thread onto the male pipe threads. Use a
½” wrench to securely tighten.
Step 19
Step 21
Blue Tube Connection
Position tank in desired location. Stand it upright or lay it on its
side (using the black plastic stand). Measure the blue tube from
the RO module over to the tank and cut it to length.
Remove a brass nut, plastic delrin sleeve and brass insert from
the parts bag. Place nut on the tube first, then the Delrin sleeve
and then insert the brass Insert into the end of the tube. (Small
taper end of Delrin sleeve must point to the end of tube).
Push blue tube into the brass tee until it stops. Slide brass nut and
plastic Delrin sleeve down until you can thread nut onto the tee.
Use wrench to securely tighten the nut.
Step 20
Step 23
Step 22