WATERS CORPORATION 2424, Руководство оператора

Страница: 90 / 196

3-26 Operating the Detector
When the gain amount is modified from the front panel, a downloaded
method, or a timed event, the following can occur:
• The auto zero adjustment can be recalculated. This can be done based on
the detector’s baseline signal, or to no signal (zero).
• The auto zero adjustment can be reset to zero.
Based on the setting of the On Inject check box at the start of a run, the
detector either evaluates the auto zero adjustment based on no signal (zero),
or it resets the auto zero adjustment to zero.
Configuring the detector
Press CONFIGURE (press Shift, DIAG). The first of four Configuration
screens appears.
Tip:
Other functions, such as specifying event inputs and enabling pulse
periods, are also available in the Configuration screens.
Configuration screens
Configuration screen 1 of 4 Configuration screen 2 of 4
Configuration screen 3 of 4 Configuration screen 4 of 4