WATERS CORPORATION 2424 Скачать руководство пользователя страница 115

Страница: 115 / 196

Replacing the lamp cartridge

4-5

4. Disconnect the lamp connector from the front panel.

5. Remove the lamp cartridge assembly and replace it with a new one.

6. Reconnect the lamp connector.

7. Push the assembly back in, and tighten the two captive screws with a

Phillips screwdriver.

Warning:

To avoid electric shock, power-off and unplug the

detector before detaching the lamp power connector from the

detector.

Caution:

To avoid damaging the detector’s electronics, power-off

and unplug the detector before detaching the lamp power

connector from the detector.

Caution:

• Do not touch the new lamp with your bare fingers. Skin oils can

greatly reduce the lifetime of the lamp. If fingerprints do get on

the lamp, remove them with a lint-free tissue saturated with

ethanol.

• To avoid misaligning the lamp, do not touch the bulb height

adjustment lever.

Lamp connector

Содержание 2424




































































































































































































Результаты поиска

Содержание 2424

Отзывы:

Бренды по названию

Популярные бренды

WATERS CORPORATION 2424, Руководство оператора

Результаты поиска

Содержание 2424

Отзывы:

Бренды по названию

Популярные бренды