WaterLogic WL400 Series, Руководство пользователя

Страница: 10 / 84

WL400 Manual Page 10 – Revision: 10-23-2019
OPERATING INSTRUCTIONS
The above picture shows front dispensing panel for the
Waterlogic WL400 Water Treatment System .
Button Operational Use
COLD WATER : Press the Cold-Water selection button. There may be a 2
second delay as Firewall™ UV lamp purifies the water and the Firewall™.
Sensor ensures your safety. Blue light will illuminate the dispense area.
AMBIENT WATER: Press the Room Temperature (Ambient) Water
selection button. There may be a 2 second delay as Firewall™ UV lamp
purifies the water and the Firewall ™ Sensor ensures your safety. Green
light will illuminate the dispense area.
HOT: Press and hold both the Hot Water 185°F (85°C) and the Extra Hot
Water selection buttons simultaneously for 2 seconds and hot water will
dispense. This is a child safety feature. Red light will illuminate the
dispense area.
EXTRA HOT : Press the Extra Hot Water Selection button to elevate the
hot tank to 203°F (95°C). Allow a few minutes for the temperature to rise
in the hot tank.
Press and hold both the Hot Water and the Extra Hot Water selection
buttons simultaneously for 2 seconds and hot water will dispense. This is
a child safety feature. Red light will illuminate the dispense area.
WARNING! Unit produces Very Hot Water up to 203°F (95°C). Water
above 125°F (52°C) can cause severe burns or scalding. Keep
unauthorized people and children away from the unit to avoid
accidental dispensing of hot water. Children should not use without
supervision.