3
!
FUSION 360™ DRINKING WATER SYSTEMS ARE DESIGNED ONLY TO IMPROVE
AESTHETIC PROPERTIES AND ARE NOT DESIGNED TO ACT AS A PRIMARY BARRIER TO
WATERBORNE MICROBIOLOGICAL OR TOXIC CHEMICAL CONTAMINATION. WHERE
THESE CONDITIONS MAY EXIST CONSULT A WATER PROFESSIONAL TO ENSURE
SUFFICIENT RAW WATER PRE-TREATMENT AND DISINFECTION.
Q: Where is the system installed?
Typically, the system is installed under the kitchen sink. This will be handy for most homeowners,
for Fusion 360™ systems are compact and take up very little space. Some homeowners or
installers prefer the basement or crawlspace, as this conserves storage in the kitchen and may
allow for easier access to the system for maintenance purposes. If you install the system more
that 20’ from your faucet, you may need a booster pump to ensure adequate pressure at the
faucet. Your dealer can provide you with this optional equipment.
Q: Can the Fusion 360™ system be connected to an extra faucet?
Yes. Many installations may include an optional ¼” tee and extra tubing to connect refrigerator
icemakers or additional sink faucets.
See your dealer for
advice and parts
.
Q: How much water does the Fusion 360™ system produce?
A Fusion 360 RO system will nominally produce 100 US gallons (380 litres) of product water per
day. This output will be affected by household water pressure, concentration of dissolved salts in
the raw water, raw water temperature and other local factors. Normally, you can expect the
system to produce about 8-10 litres of water per hour. This fast production rate assures that
drinking water will always be on hand for almost all household applications.
Q: How does the ‘Leak Stop’ anti-leak device work?
The Leak Stop device is installed in the RO cabinet and is designed to shut off the flow of water to
the RO if it detects moisture at the base of the cabinet, should a leak ever develop in the unit. This
will protect the consumer from water damage that could have resulted. Care must be taken to not
accidentally expose the Leak Stop to water when servicing the RO or changing the cartridges, as it
will activate on contact and cannot be reset. Should this occur, the Leak Stop must be replaced.
The Waterite part # for the Leak Stop device is LSD1414-KAD.
Q: What is the standard warranty with Fusion 360™ systems?
Every Fusion 360™ system comes with a standard one-year limited warranty on all parts and
repair labour. A detailed warranty card is included with the unit.
You may purchase an extended
consumer warranty if you wish - see the enclosed Extended Warranty Program information
sheet and enrolment form included in your package. Call your dealer or go to
www.waterite.com to apply
. Normal filter cartridge replacement is excluded from your warranty.
Q: What is the cartridge replacement schedule for a Fusion 360™ system?
A good rule of thumb is to replace filter cartridges (AIP12EZ and AIC12EZ and AIC10EZ) every
three to six months. RO membranes have a life usually ranging from one year to as much as
seven years, dependent upon local water conditions. Hardness (the presence of calcium and
magnesium compounds) and iron content will shorten the life of RO membranes.
Содержание Fusion 360
Страница 14: ...14 ...
Страница 15: ...15 PAGE LEFT INTENTIONALLY BLANK ...
