Waterite Fusion 360, Инструкция по установке и эксплуатации

Страница: 12 / 16

12
Section 4: Troubleshooting Guide
Trouble Shooting Guide
Possible Cause Solution
Low Water or No Water
Water supply valve closed
or RO tank valve closed. Open valves
Low home water pressure Must exceed 40
PSI. If lower,
install booster
pump – see
dealer
Crimped poly tube Repair or replace
tube
Filters or membrane plugged Replace
membrane or
cartridges
Tubes installed to wrong fitting Install tubes per
S.6 (2), (3) and
(4).
Low air charge in tank Charge to 7-10
psi or replace
tank
Tank full but no water flow Replace tank –
bladder ruptured
Flow restrictor (DLFK) Check DLFK and
replace if
necessary
Raw water TDS high Consult dealer –
may need pre-
treatment
System Runs Continuously
Auto shutoff valve defective Replace valve
Leaking Joints Fittings not seated Disconnect fitting
and reseat tube.
See S. 6.