Waterite Fusion 360, Инструкция по установке и эксплуатации

Страница: 4 / 16

4
Section 2. Unpacking and Installation
Your system includes:
9
The RO filtration cabinet assembly. Depending on the model, your four-stage RO unit may
have a booster pump installed inside the cabinet. The booster pump model will have a
cord and wall plug adapter attached.
9
One self-piercing cold water saddle valve with PE tube attached;
9
One low-lead (stainless is optional), long reach faucet and related mounting hardware
including threaded push-on tube connector (some faucets may already have the tubing
attached);
9
Two (2) one-meter lengths (blue and white) of tube for connecting the filtration system to
the cold water saddle valve and to the faucet;
9
One waste water pipe saddle and a length of black tube to attach the drain line (included in
RO hardware kit);
9
One reverse osmosis membrane element;
9
One Owner’s package including owner’s manual, warranty certificate, Extended Warranty
Plan enrolment form, Waterite Parts Program enrolment form.
Figure 1.
RO cabinet
Detachable cover
Faucet
Wall adapter
(Booster pump model)
Drain saddle TDS monitor button
Saddle valve
2 PE connection tubes
(black, white or blue)
Step 1. Selecting the System Location
1. Your RO system is designed for installation under a sink. It can however, be mounted
anywhere within 20 feet of the faucet, such as the basement or adjoining utility room. Keep
in mind that filter cartridges will need periodic replacement and that easy access must be
maintained. Do not install in a location with high humidity, heat or direct sun.