Waterco Aquamaster
I pg 05
Hydraulics diagram
INSTALLING EQUIPMENT
a. Aquamaster Control Enclosure
Install the Aquamaster control enclosure in a protected location out of direct sunlight. At top rear
of the control panel locate two keyhole fixing points. Mount two pan head type screws at 216mm
centres using a spirit level on an adequately stable vertical surface. Align the screw heads with the
keyhole fixing points and allow the enclosure to slide down on the screws.
To access the Aquamaster for connection of cabling and sensors locate the front panel of
Aquamaster and screw well in each corner. To open the panel, insert a flat blade screw driver and
half turn anti-clock wise to release the spring loaded locking pin. Ensure the pins are fully released
prior to opening the hinged front panel.
b. LCD Control Panel
Indoor Installation
The LCD Control Panel is suitable for indoor mounting. The back plate of the LCD Control Panel is
removable and is easily mounted utilising methods similar to installing a standard Australian wall
switch plate with mounting centers of 76mm.
