Waterco Aquamaster
I pg 39
Aux Configuration Screen
a) Only Available outputs will be displayed.
b) The operator cannot interlink to solar pump, heater output, heater pump or suction and return
valves.
RGB Lighting Sync Menu
a) If Waterco Multicoloured LED lights are installed the user may select a colour for pool and spa
lights.
b) In Pool Menu > Lighting Colour, selecting the sync button next to the lighting colour will start the
lighting sync sequence. This may take up to twenty seconds. First, the lights will switch 10 times
to sync to white then will select the required lighting colour. The lighting output will be activated
when the lighting sync button is selected.
c) Lighting colour will always display default on entry to this screen. If the user switches the light off
during this sequence the lighting colour will be the last colour that was on next time activated.
d) When switching the lights off and then on quickly, the selected colour setting may be lost.
Ensure 30 seconds have elapsed between switching off then on to ensure the preset colour is
maintained.
Temperature Sensor Calibration
In some installations accurate temperature readings may be required. The Aquamaster includes
a temperature sensor adjustment function which allows the installer / owner to calibrate the
temperature output from the air, pool and roof sensors. This setting may be achieved by using
a calibrated external thermometer to accurately measure the water, air and roof temperatures.
To calibrate the Aquamaster to the external temperature readings use the up and down arrows
relevant to the sensor requiring adjustment on the LCD control panel through the “Temp. Sensor
Adjust” screen selectable through the Configuration menu screen.
Display Settings
The user may adjust screen settings of Contrast Level and Brightness Level by selecting the
relevant icon up and down arrows to the desired display setting. The backlight timeout may also be
adjusted by pressing the relevant icon until the desired timeout is selected.
Changing Configuration Menu PIN Number
The Aquamaster default PIN code is 1234 > Enter. To change the PIN enter the “Change User PIN”
screen through the Configuration Menu. Enter the new PIN > Enter and then Confirm New PIN by
re entering the same PIN number again > Enter.
