Waterco Aquamaster
I pg 25
If the solar heating hydraulic configuration is “Integrated” then the user may need to select the
method of solar output by toggling between “Solar Pump” and “Solar Valve”. Where the solar
system is part of the filtration circuit and the pool water is diverted after the filtration system
generally a secondary pump is required to boost filtered water up to the solar system absorber
on the roof and returns the heated water back to the pool via the existing pool return line. If a
Waterco ECO pump is fitted, a secondary pump may not be required and the pool water may be
diverted to the solar system absorber via an actuated valve.
If the filtration pump is a Waterco ECO pump the user may need to alter the pump speed by
pressing the “Filtration Pump Speed” icon and toggle between “Medium / High” speed.
Cleaning Settings
There are two Cleaner options which may be selected by pressing either the “Cleaner Pump” or
“Infloor Cleaner” icons. If neither cleaning option is fitted press “Enter” to continue to the next
screen.
If a pressure pool cleaner is installed and equipped with a pressure pool cleaner pump select the
“Cleaner Pump” icon and press “Enter”.
To select the control output for the Cleaner Pump press either the “Spare 10A” icon to assign a
three pin plug socket outlet or the “Spare 15A” icon to assign a separately wired contact rated at
15 amps and press :”Enter” to continue to the next screen.
To select the control output for the Infloor Cleaner press either the “Spare 10A” icon to assign a
three pin plug socket outlet or the “Spare 15A” icon to assign a separately wired contact rated at
15 amps and press :”Enter” to continue to the next screen.
Prior to assigning control outputs for cleaner pumps check the appliance electrical requirements.
Lighting Setup
If the installation is fitted with a pool light, water feature light or Outdoor Light ensure the appropriate
icon is selected. The type of pool light may be selected between by toggling between “Generic” or
“Waterco Multicolour LED”. If a Waterco Multicolour LED light is paired with Aquamaster the colour
selection programming feature is enabled through the touch screen control.
Once initial setup has been completed select the “System Overview” icon to display electrical
outlet allocations.
