Watchguard Firebox X15, Руководство пользователя

Страница: 99 / 266

Enabling the WAN Failover Option
User Guide 85
Using the Network page
1 From the navigation bar, select
Network > WAN Failover
.
The WAN Failover page appears.
2 Select the
Enable failover using the Ethernet (WAN2)/Modem
(serial port) interface check box.
3 From the drop-down list, select the interface for the feature:
Ethernet (WAN2) or Modem (serial port) .
4
Type the IP addresses of the hosts to ping for the WAN1
(external) and WAN2 (failover) interfaces in the correct fields.
5
Type the number of seconds between pings and the number of
seconds to wait for a reply in the correct fields.
6 Type the maximum number of pings before time-out in the
No Reply Limit
field.
7 Type the number of successful pings that must be made before
the Edge uses the WAN1 interface again in the
Ping replies
needed for failback field.
If you are using a broadband connection for failover
If you selected to enable failover with an Ethernet connection on
WAN2, select your configuration mode from the drop-down list:
1
If your IP address is assigned automatically, select DHCP Client .
2
If you have a static IP address, select Manual Configuration .
3
If your IP address is assigned using PPPoE, select PPPoE Client .