Watchguard Firebox X15, Руководство пользователя

Страница: 154 / 266

Managing Users and Groups
140 WatchGuard Firebox X Edge
desktop. Disable this check box to override the Login Status
dialog box.
The Login Status box sends traffic to the Edge from the user’s computer
each two minutes. If you enable this check box, the Edge resets the idle
timer to zero each time the Edge receives traffic from the Login Status
box.
•
Automatic Session Termination
– This is a global property that
applies to all sessions and overrides all other authentication
options. It lets you clear the list of sessions in use and make all
user licenses available again. Enable this check box to
disconnect all sessions at the specified time in the drop-down
list.
All sessions will be disconnected at the same time. The time limit is the
number of hours since the Edge first starts up, not the length of time a
session has been active.
Configuring MUVPN client settings
The MUVPN client settings apply to all MUVPN connections to the
Edge. To configure MUVPN client settings:
1
Use your browser to connect to the System Status page. From
the navigation bar, select
Firebox Users > Settings .
The Settings page appears.
2
If necessary, use the scroll bar to scroll to the Firebox User
Common MUVPN Client Settings section.
3
You can lock the MUVPN client security policy (.wgx file) to
prevent accidental changes. Select the
Make the MUVPN client
security policy read-only
check box.
4
The remote MUVPN computers can use a virtual adapter to get
network settings, an IP address, and WINS and DNS address
assignments. You can set the virtual adapter rule for your
mobile users to:
Disabled
The mobile user does not use a virtual adapter to connect with
the MUVPN client. This is the default value.
Preferred
If the virtual adapter is in use or is not available, the mobile user
does not use a virtual adapter to connect with the MUVPN
client.