Watchguard Firebox X15, Руководство пользователя

Страница: 128 / 266

Configuring Firewall Settings
114 WatchGuard Firebox X Edge
Protocols and Ports
Set the protocol and ports to assign to this traffic rule.
Traffic Direction
Identify if this is an incoming or outgoing service.
Service action
Configures the Firebox to allow or deny this type of service
traffic through the firewall.
Restrict to remote computers
To put a limit on the scope of the service, add the IP addresses
of the computers or networks outside the firewall to which this
service applies.
Restrict to local computers
To put a limit on the scope of the service, add the IP addresses
of the computers or networks inside the firewall to which this
service applies.
Adding a custom outgoing service manually
You can add a custom service without using the wizard:
1
To connect to the System Status page, type
https://
in the
browser address bar, and the IP address of the Edge trusted
interface.
The default URL is: https://192.168.111.1
2
From the navigation bar, select Firewall > Outgoing .
3
Scroll to the bottom of the page.
4 Below Custom Services , click Add Service .
The Custom Service page appears.