Warmhaus Minerwa 25 System IE, Инструкция по установке и обслуживанию

Страница: 32 / 58

32
warmhaus.com
Transparent Parameters Menu (TSP)
Designation : All Warmhaus Wallhung Boilers
Object Type-model(s)
Burner Control Transparent Parameter List
Parameter no. Parameter Value Field
MINERWA 25
Default
P15
Selection of boiler power
0 - 8 6
0 = 24 kw
1 = 28 kw
2 = 33 kw
3 = 50 kw
4 = 65 kw
5 = 24n kw - New Burner
6 = 24E kw ( D02 HEAT EXCHANGER )
7 = 28E kw ( D02 HEAT EXCHANGER )
8 = 33E kw ( D02 HEAT EXCHANGER )
P16
Combustion configuration - DO NOT CHANGE !
0 – 1 N/A 0 = Closed combustion chamber with combustion control
1 = Open combustion chamber with flue thermostat
P17 Climatic zone selection 1..81 34
P18
CH comfort selection;
0 - 2 0
0 = Eco ( if the Pre Heat will be used in the boiler Eco should be SET on the TsP. )
1 = Comfort ( if this adjusted on TsP, then Pre Heat Function is will not work )
2 = Disable
P19
Exhaust measurement configuration
0 -1 1 0 = Flue thermostad
1 = Flue NTC
P20 Minimum value for DHW setpoint ( C° ) 35 C° - 50 C° 35
P21
Low temperature zone selection
0 -1 0 0 = Low temperature disabled
1 = Low temperature enabled / Max CH temperature 47°C
P22 Flues gas pipe length ( value 1 = 1 meter ) 1 - 10 1
P23 Cycling time pump activation - cold zone ( value 1 = 1 minute ) 1 - 10 0
P24
Push button child lock protection
0 -1 0 0 = Child lock disabled
1 = Child lock enabled
P25 Altitude loss compansation parameter ( value x 100 meters ) 0 - 20 0
P26 Water hammer delay ( value 1 = 1 second ) 0 - 3 0
P27 Pre Heat switch off temperature 30 - 75 55
P28 LCD back light activation time ( value 1 = 1 second ) 0 - 120 45
P30 Ignition power 0 - 40 N/A
P31 Ignition fan speed ( P31 x 25 rpm ) 80 - 160
128 = NG
128 = LPG