WarmFlow WS18, Инструкция по эксплуатации

Страница: 13 / 51

13
When an alarm is present, the ‘Display active alarms’ key will flash red. Pressing the
flashing key or entering the alarm menu will then display one or more active alarms or faults.
The ‘Down Arrow’ or the ‘Up Arrow’ key can then be used to scroll through the alarms.
Selecting one with the ‘Enter key’ then displays the next screen which will give more details of
the alarm together with any actions required.
Cleaning:
Selecting the cleaning menu option enters the cleaning status display and cleaning preparation
utility. The first screen to be displayed is the cleaning status display as shown in Figure 11
below.
This screen shows the number of days before cleaning is due. It will also indicate if cleaning is
overdue. Pressing the ‘Enter key’ in this screen activates the cleaning preparation utility,
preparing the appliance for cleaning. The progress of the cleaning preparation will be
automatically displayed as shown below in Figure 12.
The progress bar advances as the appliance prepares itself for cleaning. This usually takes a
few minutes but may take longer depending on the operational condition of the appliance when
preparation for cleaning is initiated. When the appliance is ready for cleaning, the display will
automatically change to the next screen which is shown in Figure 13.
Figure 10: Alarms Screen.
Figure 11: Cleaning Home Screen.
Figure 12: Cleaning Preparation Progress Screen.