WarmFlow WAH 100, Руководство по установке и обслуживанию

Страница: 4 / 32

1.0 Introduction
All Warmflow oil fired warm air heaters are suitable for space heating of industrial and
commercial premises. The heaters are automatic in operation and are designed for
free-standing operation, supplied as standard for free blowing via the air discharge
hoods or for connection to a ductwork distribution system. (Contact Warmflow for
details).
The heaters are indirect fired with the products of combustion being carried via the
flue to atmosphere.
Warmflow warm air heaters are designed to burn 28 second redwood No1 (Kerosene
class C2) fuel or with some adjustment 35 second redwood No1 (gas oil class D).
On the 500/600 WAH only gas oil may be used.
The construction of the heaters provides a framework of exceptional strength and
pleasing design, while the integral base pallet guarantees safe stable handling.
All the external panels are of a double skin construction, which insures low surface
temperatures. The panels are all easily removable for complete access to any part of
the heater while the front panel has been split to allow for easy access to the combustion
chamber door.
As standard the burner, heater and controls are covered by the manufacturers parts
and labour warranty valid for 12 months (from the heater date stamp). However this
warranty will be invalidated if the heater is improperly installed or commissioned.
1.1 General Requirements
The installation of the air heater must be in accordance with the following regulations:
BS 5410: Parts 1 & 2: 1977: Code of practice for oil firing.
Current fire regulations.
Current building regulations.
Current IEE wiring regulations.
1.2 Installation
The heaters must be placed on a level non-porous, non-combustible surface which is
capable of supporting the weight of the heater. The heaters must be stable or rigidly
fixed in order to prevent vibration in the appliance, which can lead to the premature
failure of the heater components.
Page 2