W&T 57630, Руководство пользователя

Страница: 42 / 211

42
W&T
configuring the network parameters
IP Addr.
The IP address may be changed at this point.
Subnet Mask / Gateway
For data exchange throughout the subnet, the appropriate subnet
mask and IP address of the gateway must be entered.
BOOTP Client
If the Web-IO will not participate in central IP addresss assignment
via BOOTP, uncheck
BootP enable .
DNS Server
With some network devices, such as mail and time servers, it
makes sense to address them not by their IP address but rather
using a name. For this a DNS server must be specified.
If you do not have the required information, contact your
network administrator.
When you have made all your entries, click on the Temporary
Storage button. This sends the parameters first to the Web-IO.
The changes do not become effective until they have been
activated. For this use the
Logout button or menu path
Config >> Session Control >> LogOut.
After clicking on the Save button, the Web-IO is restarted with
the current parameters. Normally the start page of the Web-IO
is refreshed within about 10 seconds. If it does not refresh, click
on the
here link.
1
Note that applications which are communicating with the
Web-IO at this point in time may experience a fault.