W&T 57630, Руководство пользователя

Страница: 154 / 211

154
W&T
Alarm
Mailtext
This can be a variable text. In addition you can use alarm vari-
ables. These are placeholders for the state of the individual
inputs and outputs as well as for the counter states.
The possible variables can be found in the following table:
Alarm Variable Description
<i> Input state as bit pattern in hex format
<i x > State of input no.
x
ON = 1,
OFF = 0,
x
may be between 0 and 11
<o>
Output state as bit pattern in hex
format
<o x > State of output no.
x
ON = 1,
OFF = 0,
x
may be between 0 and 11
<c x > Count state of counter no.
x
in decimal
format
x
can be between 0 and 11
<t> Time stamp with date and time
formatted
DD.MMM.YYYY hh:mm:ss
<br>
Inserts a line skip
The example entered in the configuration frame would then look
as follows as an e-mail:
The mail tags were replaced by the values current at the time
the mail was sent.
5.11.3 SNMP Alarm
In networks with a network management program you can also use
SNMP protocol for sending alarms.
Under Config >> Device >> Alarm >> Alarm1 you must also
activate SNMP Trap Enable in addition to the alarm settings.
m
Required access rights: Administrator