W&T 57630, Руководство пользователя

Страница: 156 / 211

156
W&T
Alarm
Alarm Variable Description
<i>
Input state as bit pattern in hex format
<i x > State of input no.
x
ON = 1,
OFF = 0,
x may be between 0 and 11
<o> Output state as bit pattern in hex
format
<o x > State of output no.
x
ON = 1,
OFF = 0,
x
may be between 0 and 11
<c x > Count state of counter no.
x
in decimal
format
x
can be between 0 and 11
<t>
Time stamp with date and time
formatted
DD.MMM.YYYY hh:mm:ss
<br> Inserts a line skip
1
If you have entered an Administrator password, you will
ave to enter this in your manager software as a
„community string“!
5.11.4 Alarm via UDP
Another way to pass an alarm to another network station is
provided by UDP protocol. Here a corresponding program must be
running on those PCs that are supposed to receive such an alarm.
To activate UDP for alarm transmission, select in the navigation
tree
Config >> Device >> Alarm >> Alarm1 and select UDP Client
Enable in the Enable area.
m
Required access rights: Administrator
Send the settings to the Web-IO by clicking on the Temporary
Storage button.
Under Config >> Device >> Alarm >> Alarm1 >> UDP the UDP-
specific configurations can then be entered.
m
Required access rights: Administrator