38
Description of the device
Wameta MULTIMIG PRO 180 SYN is an inverter rectifier. The device is
connected to a 1-phase 220-240V 50 / 60Hz power supply. Fuse size 16A slow
blow. The device is designed for MIG/MAG, MMA, and DC TIG welding with lift
ignition. (TIG torch sold separately). Use for any other purpose is prohibited.
Introduction
Remove the device and accessories from its packaging. If you no longer want to
use the packaging for transporting or storing the machine, Take care of recycling
the packaging materials.
Check that the following products are
available on the packaging.
Check that the machine or equipment
does not show any transport damage
and that no part of the machine or
equipment has come off. Transport
damage must be reported to the
carrier.
Technical information
Model
Wameta MULTIMIG PRO 180 SYN
Mains voltage U
1
V
230
Mains frequency Hz
50/60
Maximum input current I1
max
A
32
Rated input current I1
eff
A
16
Maximum input power kVA 7.4
Open circuit voltage MMA V
69
MMA
MIG/MAG
TIG
Arc voltage V
20.8-26.4
15.5-23.0
10.6-17.2
Welding current A
20
～
160
30-180
15-180
ED A @ 40°C 25%
160
180
180
ED A @ 40°C 60 %
98
116
116
ED A @ 40°C 100 %
76
90
90
Efficiency η
85%
Power factor Cosφ 0.75
Insulation class
H
Protection class IP
21S
Cooling type
Fan
Measurements cm
L×W×H
55×22×38
Weight kg
14 kg
Product
Amount
Welding machine
1 pc
MIG/MAG welding
torch
1 pc
Earth cable
1 pc
Gas hose
1 pc
User manual
1 pc
