Wallenstein 2E9US111XNS091454, Руководство оператора

Страница: 46 / 72

Operating Instructions
BXTR6438
Trailer Wood Chipper
46
5.13 Storage
• If the machine is not going to be used for a period of time,
put the chipper away in storage.
• Store the unit in an area away from human activity.
• Do not let children play on or around the stored machine.
• Store the unit in a dry, level area.
• Perform the following measures to ensure a smooth start-
up before putting the chipper back to work. Completely
inspect all major systems. Replace or repair any worn or
damaged components.
IMPORTANT! Review the engine owner's manual to prepare
the engine for storage.
1. Fill the fuel tank and add fuel stabilizer. Operate the engine
for a few minutes to let fuel cycle through the system.
2. Remove ignition key and store in a secure place.
3. Remove the battery and store it in a cool, dry area where
it cannot freeze. See
page 53 . Connect a battery
maintainer to keep it at full charge.
4. Inspect all rotating parts for entangled material. Remove all
entangled material.
5. Remove all remaining material and debris from the
machine.
6. Clean the machine to remove all dirt, mud or debris.
7. Check the condition of the drive belt and sheaves. Replace
or adjust as required.
8. Fold up the feed table up and secure. Turn the discharge
chute towards the engine.
9. Make sure tool and tank doors are latched, belt access
covers, and shields are bolted.
10. Touch up paint nicks and scratches to prevent rusting.
11. Cover with a waterproof tarp if storing the machine inside is
not possible.
5.13.1 Removing from Storage
When removing this machine from storage, follow this
procedure:
1. Review and follow the Pre-start checks on page 34 .
2. Review safety and operation procedures.
3. Install and connect the battery. See page 53 .
Fig. 37 –
Prepared for Storage