Wallenstein 2E9US111XNS091454, Руководство оператора

Страница: 47 / 72

BXTR6438
Trailer Wood Chipper
Service and Maintenance
47
6. Service and Maintenance
WARNING!
Risk of serious personal injury. Stop engine
before performing ANY service or maintenance
procedure. Reinstall all covers and shields
removed before putting machine back into
service.
W033
WARNING!
Before you start service or maintenance work:
• Set the machine to a safe condition.
• Wait for the machine to cool down. Engine
components and fl uids may be hot enough to
cause burns.
• Read and understand all of the service and
maintenance safety information.
W041
SAFE CONDITION
• Shut off engine. Remove ignition key.
• Make sure all moving parts have stopped.
• Disconnect battery ground (-) cable.
• Block or chock wheels.
6.1 Maintenance Safety
• Follow good shop practices:
-
Keep service area clean and
dry.
-
Be sure electrical outlets and
tools are properly grounded.
-
Use adequate light for the job
at hand.
• Never operate the machine or the towing vehicle in a closed
building. The exhaust fumes may cause asphyxiation.
• Allow the engine to cool before performing maintenance.
Engine components and oil may be hot enough to cause
injury.
• Never work under equipment unless it is properly
supported.
• When performing any service or maintenance work always
use personal protective equipment.
• Where replacement parts are necessary, use only OEM
parts to restore your equipment to original specifications.
The manufacturer is not responsible for injuries or damages
caused by use of unapproved parts or accessories.
• Inspect and tighten all bolts, nuts and screws. Check that
all electrical and fuel connections are properly secured.
• When completing a maintenance or service function, make
sure all safety shields and devices are installed before
placing chipper in service.
• A When cleaning any parts, do not use gasoline. Use a
cleanser designed for that purpose.
• Always use proper tools in good condition. Make sure
you understand how to use them, before performing any
service work.
IMPORTANT! Refer to the engine manufacturer's manual
for maintenance and service information.