Wallenstein 2E9US111XNS091454, Руководство оператора

Страница: 33 / 72

BXTR6438
Trailer Wood Chipper
Controls
33
4.6 Ball Hitch 2-5/16"
(As equipped)
4.6.1 Coupling for transport
1. Make sure all bystanders are clear of the working area.
2. Make sure there is enough room and clearance to safely
back up to the machine.
3. Use the trailer jack to raise the tongue above the height of
the tow vehicle ball hitch.
4. Slowly back the tow vehicle until the coupler on the hitch
and ball are aligned.
5. Attach the ball hitch:
-
Place the coupler over the ball on the hitch.
-
Turn the hand wheel clockwise until it is snug and the
hitch ball is secure.
-
Crank the jack up.
01572
Fig. 23 –
Trailer Hook-up
6. Cross safety chains under the trailer tongue and attach
securely to the tow vehicle.
7. Connect the wire harness plug to the tow vehicle. Make
sure there is provide slack for turning.
8. Check to be sure turn signal, marker and brake lights are
functioning.
4.6.2 Adjustable Height
The height of the hitch coupler can be adjusted when using a
different tow vehicle to haul the chipper.
Lower the trailer jack. Place wheel chocks at the chipper wheels
to prevent unexpected movement of the chipper. Disconnect
from the tow vehicle.
1. Remove the two bolts and nuts that fasten the coupler to
the hitch ladder.
2. Move the coupler to the desired position
3. Reinstall the bolts and nuts. Torque to 160 ft•lb
(215 N•m).
01573
Fig. 24 –
Adjust Hitch Coupler height