4.3.
WARNING
Please note the safety notes in the respective chapters throughout operation.
1.
Demount protection cap.
2.
Mount reflector.
3.
Insert modeling lamp.
4.
Mount umbrella (optional).
5.
Connect to power supply.
6.
Switch on device.
7.
Adjust modeling lamp.
8.
Adjust flash output.
9.
Adjust acoustic beeper button.
10.
Prepare flash trigger.
11.
Mount on tripod (optional).
5.
Demount and mount protection cap
WARNING
Posterior danger of bursting of flash tube
Make sure not to touch the flash tube with bare hands accidentally.
A
Openings for reflector or protection cap
1. Demounting of protection cap:
Remove safety cap from unlocking lever.
Push back unlocking lever and keep pressed.
Turn protection cap anticlockwise as far as it will go and take off from the
device.
Release the unlocking lever.
2. Mounting of protection cap:
Cool down the device.
WARNING!
Fire danger through overheating. Danger of burning. Let
the device cool down for approx. 30 minutes.
Push back unlocking lever and keep pressed.
Plug in the protection cap into the three openings on the device, turn it
clockwise and listen for the cap to snap into place.
Trigger the unlocking lever.
Stick the safety cap onto the unlocking lever.
6.
Mount and demount reflector
WARNING
Posterior danger of bursting of flash tube
Make sure not to touch the flash tube with bare hands accidentally.
A
Openings for reflector or protection cap
10
11
12
9
10
A
A
