Don´t cover the ventilation slots of the device during operation.
Remove easily inflammable materials.
WARNING
Danger of burning on hot parts
The modeling lamp and flash tube could heat up up to 240°C, the reflector up
to 75°C and the flash housing up to 45°C.
Don´t touch the parts during operation and cooling down.
Please cool down your device approx. 30 minutes before starting any
mounting or maintenance arrangements.
WARNING
Danger of cutting and splitting through breaking modeling lamp and
breaking or bursting flash tube.
Even small residues of skin oil on the flash tube could lead, due to the high
heat impact, to the splitting of the flash tube. Broken glass could hurt eyes
and skin.
Please handle the modeling lamp and flash tube with care to avoid
bursting.
Don´t touch the flash tube with bare hands. Wear clean cotton gloves or
use a clean cloth.
Avoid touching the flash tube accidentally when mounting or changing
accessories.
3.
Unpack and check the device
1.
Please unpack your device carefully.
ADVICE: Keep the styrofoam packing for future storage and transportation
of the device.
2.
Please check, if the delivery is complete:
1 VC Studio Flash with protection cap
1 Reflector
1 Modeling Lamp
1 Sync Cord
1 Power Cord
1 Instruction Manual.
3.
Please check, if the delivery is undamaged.
ADVICE: If the delivery should be uncomplete or damaged, please contact
[email protected] or our service hotline with the telephone number
+49 843294890.
4.
Operation of the device
4.1.
Overview about the parts
A
Reflector
B
Unlocking Lever
C
Photo Cell (hidden)
The Photo Cell is below the red,
transparent cover on the top side of the
device
D
Ventilation Slots
E
Tripod Mounting
F
Umbrella Holder
G Handle
4.2.
Quick start guide
ADVICE:
The detailed instruction for the following operations can be found in the
respective chapters in this instruction manual.
Keep the sequences of the following operation steps when using the device for
the first time to avoid damages on the device.
A
8
7
7
A
B
C
F
E
D
G
