11.
Mount on tripod (optional)
ADVICE:
Please note the user information of the tripod manufacturer.
CAUTION
Select a tripod of suitable weight and dimensions. See
Technical
Specifications
.
Make sure, that the tripod with the mounted device has a tilt and skid
resistant stand.
A
Locking lever
B
Locking knurl
C
Fixture
1.
Loose locking lever.
2.
Open locking knurl.
3.
Mount the device on the tripod.
4.
Tighten locking knurl.
5.
Close locking lever.
12.
Mount reflex umbrella (optional)
CAUTION
Just use reflex umbrellas with a rod diameter of 8-10mm.
A
Fixture
B
Locking knurl
1. Let the device cool down.
WARNING!
Danger of burning on reflector, modeling lamp and flash
tube. Please cool down approx. 30 minutes.
2. Open locking knurl.
3. Insert the rod of the reflex umbrella through the opening in the reflector
into the fixture as far as it will go.
4. Tighten locking knurl
ADVICE: Don´t tighten the locking knurl too tight as to avoid damages on
the reflex umbrella.
13.
Switch on and off of modeling lamp
1.
Switch on device.
See
Switching on and off of device
.
11.
Switch on modeling lamp:
Press control OUTPUT POWER once.
The modeling lamp switches on.
The LED MODEL
lights up.
12.
Switch off modeling lamp:
Press control OUTPUT POWER twice.
A
B
C
B
A
20
20
19
