10.
The other end of the sync cord should be connected with the PC jack
socket of the camera.
Prepare flash trigger through remote receiver (optional)
ADVICE:
Please note the user information of the remote receiver manufacturer.
1.
Connect the cable of the remote receiver with the socket for the sync cord.
Switch on and off of flash trigger through build-in photo cell
The photo cell enables the device to trigger through
another external device
IR remote trigger
On-camera flash devices
On-camera flash devices with integrated pre-flashes.
1.
Switch on device.
See
Switching on and off of device
.
2.
Switch on photo cell:
Press push-button SLAVE.
The LED SLAVE 1 lights up.
3.
Switch off photo cell:
Press push-button SLAVE until LEDs SLAVE 1, SLAVE 2 and SLAVE 3 go out.
Switch on, adjust and switch off of pre-flash suppression
1.
Switch on device.
See
Switching on and off of devic
e.
2.
Switch on device.
See
Switching on and off of device
.
3.
Switch on photo cell:
Press push-button SLAVE.
LED SLAVE 1 lights up.
4.
Switch on pre-flash suppression:
Camera with 1 pre-flash:
Press push-button SLAVE until LED SLAVE 2 lights up.
Camera with 2 pre-flashes:
Press push-button SLAVE until LED SLAVE 3 lights up.
5.
Switch off pre-flash suppression:
Press push-button SLAVE until LEDs SLAVE 2 and SLAVE 3 go out.
17
