1.
Switch on device.
See
Switch on and off of device
.
2.
Turn control OUTPUT POWER until the digital display OUTPUT POWER shows
the desired output.
When the device reached the adjusted flash output, LED TEST lights up.
3.
Trigger test flash:
Press push-button TEST.
The LED TEST goes out and lights up not until the device will reach the
adjusted flash output again.
10.2.
Adjust the modeling lamp depending on flash output
You can adjust the modeling lamp via 50 values.
1.
Switch on device.
See
Switch on and off of device
.
2.
Press control OUTPUT POWER once.
The modeling lamp switches on.
The LED MODEL II lights up.
3.
Turn control OUTPUT POWER until the modeling lamp reaches the
desired power.
The digital display OUTPUT POWER shows the respective flash output.
4.
Switch off modeling lamp:
Press control OUTPUT POWER twice.
The modeling lamp switches off.
The LED MODEL II goes out.
10.3.
Adjustment of modeling lamp independent from flash output
You can adjust the modeling lamp via 50 values.
Switch on device.
See
Switch on and off of device
.
5.
Press control OUTPUT POWER twice:
The modeling lamp switches on.
The LED MODEL I lights up.
6.
Press push-button MODEL
or push-button MODEL
until the
modeling lamp reaches the desired power.
The digital display OUTPUT POWER shows the current power of the
modeling lamp for 1 – 2 s and switches to the flash output
automatically.
7.
Switch off modeling lamp:
Press control OUTPUT POWER once.
The modeling lamp goes out.
The LED MODEL I goes out.
10.4.
Switch the acoustic beeper button on and off
15.
Switch on device.
See
Switch on and off of device
.
8.
Switch on acoustic beeper button:
Press push-button AUDIO.
The LED AUDIO lights up.
A short beep can be heard when reaching the adjusted flash output.
9.
Switch off acoustic beeper button:
Press push-button AUDIO.
The LED AUDIO goes out.
After releasing a flash, the modeling lamp goes out for a while und lights
up again, when the device has reached the adjusted flash output again.
A short beep can be heard when reaching the adjusted flash output.
10.5.
Prepare and adjust flash trigger
Prepare flash trigger through camera
ADVICE:
Please note the user information of the camera manufacturer for flash
synchronisation.
1.
Connect sync cord (included in delivery) with the connecting socket on the
device.
15
16
