Sound Parameters
27
M Manual
MOD2QNT (Modulator 2 Quantize Depth)
Gradually transforms continuous modulations like a LFO
sine-wave into discreet steps. If set to 0, no quantization is
introduced to the modulation signal. Values from 1...7
introduces different levels of quantization, thus changing
the modulation´s output from a continuous waveform to a
quantized wave of discreet steps.
g
Use higher quantization values together with a LFO
as source to achieve sample-and-hold effects.
LINKMOD (only available for Oscillator 2)
Link allows the same pitch modulation settings for both
oscillators to be used. When enabled, oscillator 2 uses the
pitch modulation parameters of oscillator 1 for all modula-
tion settings and pitchbend messages. That means, whene-
ver a modulation is applied to oscillator 1, it is also applied
to oscillator 2. When disabled, each oscillator uses its own
individual modulation settings.
Osc Sync & Glide Page
Here you find parameters regarding the oscillator syn-
chronisation and glide functions.
Oscillator 1 & 2 Sync&Glide display page
HSYNC (Hard Sync, only in Modern mode)
Enables or disables oscillator synchronisation. When enab-
led, oscillator 2 acts as a slave that is controlled by oscilla-
tor 1, the master. Each time oscillator 1 starts a new peri-
od, it sends a trigger signal to oscillator 2, forcing it to
restart the wave signal, too. As a result, interesting sound
effects may be generated, especially when both oscillators
are operating at different pitch settings. Using additional
pitch modulation by envelopes, LFOs or pitchbend will
bring further movement into sync sounds.
GLIDE
Same functionality as for the
Glide
panel button.
Содержание M
Страница 1: ...User Manual ...
